NP241OR Shifter Assembly

Jeep Model Select Vehicle TJ / LJ XJ / MJ

Kit contents:

• Body mounting bracket
• Flex mount well nuts
• Aircraft grade control cable
• Transfer case anchor bracket
• Bearing ends
• Fastening hardware
• Instructions

This is the cable shifter that put Jeep cable shifters on the map. Our Jeep Rubicon 241OR RockTrac transfer case shifter was originally designed for conversion powertrains, yet most of these kits are now chosen for factory Jeeps because of their smoother, stronger operation.

This cable shifter assembly replaces everything below the factory shift handle, including the problematic z-bar linkage, tunnel mount bracket, transfer case mount bracket, and shifter pivot. The factory shift handle is retained.

Constructed of 3/16" steel, professionally welded and black zinc plated for superior corrosion resistance.

This kit works for:

• TJ / LJ Wranglers whose original Model 231 transfer case has been replaced with a 241OR RockTrac.
• XJ / MJ Cherokees or Comanches receiving a 241OR swap.

Benefits at a Glance:

• Restore and improve shifting action in Jeeps with suspension or body lifts and tummy tucks
• Provide a clean shifting mechanism for conversion transmissions (manual or automatic)
• Deliver a crisp shifting feel and greater sense of control
• Eliminate shifter kick-outs and potential transfer case damage
• Maintain the factory shift pattern (2 High frontmost → 4 Low rearmost)
• Factory shift handle retained
• Console removal not required
• Front yoke and driveshaft removal unnecessary
• Factory actuator / rotator plate retained

Our Control Cable

We specify and provide our customers with the best control cable we've ever seen, featuring:

• Heavy-duty crimped ends
• Stainless steel cable
• Industrial grade, high-temp outer sheath
• Super-low friction, Teflon liner
• Tight bend radius featuring no-bind resistance clear down to 5"
• All US made

Applications & Compatibility

Compatible Jeeps

Fits 1997-2006 TJ / LJ Wranglers and 1984-2001 XJ Cherokees / 1986-1992 MJ Comanches that have the Jeep Rubicon NP241OR RockTrac transfer case installed. The flexible cable and bracket geometry make it adaptable to almost any drivetrain configuration — from stock to full conversion or custom crossmembers.

Compatible Transmissions

The transfer case bracket attaches independently to the 241OR mounting points, so it fits nearly all factory and conversion transmissions.

Compatible Transfer Case

This kit fits the Jeep Rubicon 241OR RockTrac transfer case only. For 231 or 242 models, use our SK2XC.

Installation Requirements

Normal hand tools are all that’s required. Removing the skid plate may help. Detailed instructions are included.

Matt at BleepinJeep made this terrific video, installing our #SK2XC shifter (the install is similar).

Video Instructions

Related Products

Kit SK3XR, shifter, NP241OR Rubicon transfer case, cable actuation, TJ / LJ

This kit is similar to our #SK2XC kit, but for the Jeep Rubicon RockTrac 241OR transfer case in TJ / LJ Wranglers. Read more about it here...

SK3XR

Kit, SK2X shifter assembly for New Process 231, 207, & 242 transfer cases

Our original and still popular #SK2X direct linkage shifter kit - primarly built for YJ Wranglers - is also applicable to TJ & LJ Wranglers, or XJ & MJ Cherokees which don't have their shifter handle anymore, or where the installer is wanting more of a builder's kit.

SK2X

NP231 rebuild, repair and upgrade parts

Some transfer cases are due for a re-seal or even full rebuild. We carry the world's most full-featured kits and components, here.

NP242 rebuild, repair and upgrade parts

Some transfer cases are due for a re-seal or even full rebuild. We carry the world's most full-featured kits and components, here.

Heavy Duty Slip Yoke Eliminators for 231 Transfer Cases

Upgrade and shorten your NP231 output shaft to handle the increased torque of your new gears, and improve the driveshaft angle, especially important for lifted Jeeps. View the SYE kit that will work best for your situation.

AX15 Transmission Package, New, Turn-Key

Built for Novak by Aisin Warner, this is the best rendition of the AX15, with all updates and improvements implemented over the years. Our AX15 comes complete with shifter assembly. If ordered with the above adapter kit, we will assemble and configure it for you to the maximum extent possible. See and order one here.

Summary

Our goal at Novak was to simplify the shifting mechanism. Initially this was done for our many customers performing engine and transmission conversions where the transmission was moved or replaced rendering the stock linkage points unusable. The solution proved to be much more universal and applies this same superior shifting action to the many running stock powertrain owners unhappy with the existing sloppy shifting action. There are many situations where even the slightest bind on your Jeep causes the complex stock linkage apparatus to pop the transfer case out of its range or mode unexpectedly. Our assembly eliminates the excess play and binding that occurs in the factory linkages, whether caused by wear, modification or simple flex when on the trail or rocks.

Note on Counterfeit Shifter Kits

you may see copycat shifter kits on the market pretending to the Novak name and design. Their bracketry and especially cable are of poor quality and we will be unable to warranty failures of such. If you purchased your kit from another retailer and are shorted parts or instructions, or have had a cable failure, please pursue any warranty or return with them, or just buy the better kit to begin with.

Also See

• The Novak #SK2XC Cable Shifter for 231 & 242 Transfer Cases in Jeep TJ Wranglers, XJ Cherokees and MJ Comanches
• The Novak #SK2X Direct Linkage Shifter for the Jeep Models 231, 207 and 242 Transfer Cases
• The Novak Guide to the Model 231 Transfer Case
• Parts for the Model 231 Transfer Case
• The Novak Guide to the Model 242 Transfer Case
• Parts for the New Process 242 Transfer Case