Welcome Guest:
Login or Register

GM Generation III & IV V8 Engine Mounts

for

1976-1986 CJ Jeep

Novak's bolt & weld-in engine mounts for the 1976-1986 Jeep CJ provide immense strength and a precise GM Vortec & LS V8 engine installation.

Product & Features

Block_MMCJ-G3

Ease of Installation

These mounts are bolt-in style and detailed instructions will guide to an ideal installation. We do recommend a weld be placed on these mounts on the top lip for the best strength achievable. 

Strength

The Novak mounts feature thick 3/16” laser cut and CNC bent steel construction. Engineered using a welded box design geometry to provide maximum strength and assure that they will survive even the wildest V8's.

Vibration Isolation

Each mount kit comes with our high-grade Nitrile isolators that are specified for that ideal balance of isolation and firmness with the power of modern engines. Substantial 5/8” through bolts capture the assembly. Replacement bushing sets are available below should replacement ever be needed.

Compactness

Geometry of the mounts is compact to provide clearance for all stock components including steering shaft with its pillow block and the recommended exhaust headers below. 

mmcj-g3_passenger_side_installed

The Novak frame bracket, as bolted to the Jeep frame rail.

Engine Mount Finish 

As the mounts are usually also welded to the frame, any finish on the frame side brackets as well as the frame would be burned. You may enamel, powder coat or otherwise finish the bracketry and adjacent frame area to your own style. Engine plates are coated in a rust resistant finish but may also be painted.

Contents 

Each mount set contains left and right frame mounts, two sets of urethane bushings, two engine plates along with the necessary installation hardware and instructions.

Applications & Compatibility

Jeeps

These mounts fit all 1976-1986 Jeep CJ models.

Engines 

These mounts will fit the GM Gen III & IV LS/Vortec V8 engines.

Related Products

Block_K-CJ30H

**Fan/shroud assemblies ordered with the radiator come pre-assembled for a “drop-in” package saving substantial time on your part.

Block_FX3300-C

Block_EH001


Block_MM-B

Installation Requirements

Unbolting and removal of the factory frame mounts for factory AMC engines is required.

Placement  

We have predetermined engine placement for the installer. There is a very fine window in which the GM Gen. III & IV V8 can properly fit into a CJ Jeep, and we've done this design legwork already.

Read Novak's detailed and most recently updated CJ Gen III & IV conversion instruction package as provided with our engine mounts.

Also See