Welcome Guest:
Login or Register

War Hero Banner.jpg

Dana® Ultimate 60 Axles

for

JK Jeeps

For more than a century, Dana® axles have set the standard for axle dependability, strength, and performance for OEM vehicle manufacturers. Now, to meet a growing consumer demand for Dana quality axles and gearing, Novak offers genuine front and rear Ultimate Dana 60. These are the biggest strongest axles ever made for the Jeep JK, and are designed to handle the roughest terrain

The Dana Ultimate 60 Axles are the perfect upgrade for your JK Jeep conversion, allowing you to take full advantage of all that extra power.

Features


Ratio: 4.88 5.38

use the options above to select the correct product for your conversion

The Ultimate Dana 60™ Front Axles for the Jeep JK

  • Massive Spicer® SPL®-70 u-joints—exclusive to Dana
    • Providing optimal performance for lifted vehicles with larger tires
    • Improved “rock solid” seals for optimal protection from environmental contamination
    • Manufactured from cold-forged steel
    • Providing for higher torque load
  • Spicer® 35 spline SAE-4340 nickel chromoly steel axle shafts
    • Designed for larger tires and off-road punishment
    • Ensuring maximum strength and durability
  • Warn® 35 spline hub locks
  • Dead spindle design
    • Ensuring additional strength
    • Allowing for wheel bearings to be serviced individually
    • Easier to repair and service than unit bearing design
  • High-strength, heavy gauge brackets
    • Additional durability where it matters the most
    • Skid plate incorporated into lower control arm bracket
  • High-clearance carrier with ribbed housing design
    • Cover face rotated back for greater ground clearance
    • Reinforced ribbing on bottom of carrier to prevent hang-ups on rocks or rough terrain
  • Selectable electronic locking differentials
    • Precision-forged gears offer ideal meshing, strength and durability
  • Heavy-duty 8 x 6.5" wheel bolt pattern
  • Nodular iron diff cover with protective ribbing
    • Raised fill plug for increased fluid capacity due to increased pinion angles
  • Upper and lower control arms in same location as OE
    • Better fit, less adjustment on control arm
    • Optimal articulation
    • Easy to install
    • Cast-in upper control mount for added strength and durability
  • Genuine Made in the USA Spicer® 10" (256 mm) ring and pinion gear
    • Available ratios include 4.88 and 5.38
    • Precision heat treated for optimal hardness and durability
    • Face hobbed for precise mating of gear teeth and a quieter ride
    • Shot peened for double the fatigue life
    • Lapped to reduce noise and heat
  • Spicer® 1350 Strap-style/Half-round end yoke
    • Provides added strength
  • Axle tubes: 3.5" tube diameter/.370" wall thickness
    • Offers superior strength
    • Helps prevent steering from being knocked out of alignment
  • Upgraded heavy-duty brakes with plug-and-play ABS system
    • Massive vented rotors (360mm O.D.) and dual piston calipers for optimal braking power and optimal cooling
    • Ideal on- and off-road stopping power for vehicles with large tires

The Ultimate Dana 60™ Rear Axles for the Jeep JK

  • Full-float design
    • Vehicle weight carried by housing instead of shaft
    • Delivers greater load-carrying ability
  • 35 spline SAE-4340 nickel chromoly steel axle shafts
  • Selectable electronic locking differentials
  • Upgraded heavy-duty brakes with plug-and-play ABS system
    • Massive vented rotors (358mm O.D.) and dual piston calipers for optimal braking power and optimal cooling
    • Ideal on- and off-road stopping power for vehicles with large tires
  • Genuine Made in the USA
  • Spicer 9." (248 mm) ring and pinion gear inside
  • Spicer® 1350 Strap-style/Half-round end yoke
  • Axle tubes: 3.5" outside diameter/.390" wall thickness
  • Heavy-duty 8 x 6.5" wheel bolt pattern
  • Heavy-duty brackets
  • Nodular iron diff cover