Chevrolet 4.3L V6 Engine Mounts
for
I4 version TJ Wrangler Jeeps
Novak's bolt-in / weld-in engine mounts for the Jeep TJ & LJ Wranglers provide immense strength and a rapid and precise Chevrolet V6 engine installation.
|
|
||
Ease of Installation
These mounts are a purely bolt-in design when replacing the 2.5L I4 engine with the Chevrolet 4.3L V6 engine, utilizing the factory four-cylinder frame horns.
Strength
The Novak mounts feature a thick 3/16 steel construction and a welded box design for the maximum strength available. They employ the best engineering and geometry to assure that they'll survive even the most torquey V6's.
Placement
We have predetermined engine placement for the installer. There is a very fine window in which the Chevrolet 4.3L V6 can properly fit into a TJ Jeep, and we've done this design legwork already.
Compactness
The mounts keep themselves out of the way of the steering and its pillow block, allowing the installer to keep the entire Jeep steering system intact and undisturbed.
Vibration Isolation
Each mount kit comes with our high-grade urethane isolators that are gauged well for that ideal balance of isolation and firmness. The large, graded 5/8” bolts and all associated hardware are included. Additionally, Novak will always be here to inexpensively provide replacement urethane bushings, if needed - years down the road.
 |
| The Novak frame bracket, as attached to the Jeep frame horn and the engine. |
Corrosion Resistance
Our #MMTJ-CV6 mounts are black zinc coated for resistance against corrosion. However, if you have a certain theme to your installation, you may enamel, powercoat or otherwise finish the bracketry to your own style.
Installation Notes
The existing I4 frame horns will be trimmed back the specified amount with a cutoff wheel or reciprocating saw. We recommend the installer seal up the cut with a black enamel for corrosion protection. The installer may use the provided 7/16 transverse thru bolts or use a plug weld, as per preference.
These Mounts are applicable to the following Jeeps & engines:
| Jeeps | Engines |
If you're seeking engine mounts for the Chevrolet Small Block V8's, see them here.
|
|
